Shiver cartridge

flowrider · 07-10-2003, 07:30 AM

Anyone here ever take one apart?

I've tried to separate the lower assembly from the upper but can't seem to get it apart.

If I can get it apart I think I can repair it.

Here's a pic as well.

flowrider · 07-10-2003, 04:55 PM

<bump>

Still looking for some help here

trail worker · 07-10-2003, 07:43 PM

.pot for the man, someone has to be able to help him out!

I am going to state the possibly obvious here...are you sure it isn't held on my a c-clip or that it is not supposed to come off from that way,perhaps it is removed via the top?
try what i suggested in the PM i sent you steve...those were probably you're best bets.i think that running the heaviest weight oil would work the best though...that,or contacting zerodegreec.
good luck.
ps,i still want to know about the truck you have for sale...

07-10-2003, 07:30 AM	#1
flowrider back in the saddle Join Date: Nov 2002 Location: White Rock Posts: 793 Rep Power: 49	Shiver cartridge Anyone here ever take one apart? I've tried to separate the lower assembly from the upper but can't seem to get it apart. If I can get it apart I think I can repair it. Here's a pic as well.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shiver factoid (copied from Mtbr.com forums)	DaveM	Gear	5	05-18-2004 05:51 PM
888 oil change/oil height?	Suckafoo	Gear	4	05-01-2004 12:32 AM
Does anyone run a Mojo Cartridge Kit in the Marzo Shiver?	Kailinger	Gear	5	12-31-2003 10:36 AM
second thoughts on the Shiver?	BAC5.2	Gear	51	11-25-2003 02:27 AM
'01 Shiver cartridge repair?	flowrider	Gear	9	07-09-2003 06:54 PM

07-10-2003, 04:55 PM	#2
flowrider back in the saddle Join Date: Nov 2002 Location: White Rock Posts: 793 Rep Power: 49	<bump> Still looking for some help here

07-10-2003, 07:43 PM	#3
trail worker bikes on the brain Join Date: Nov 2002 Location: West Kootenays Posts: 5,771 Rep Power: 8773456	.pot for the man, someone has to be able to help him out! I am going to state the possibly obvious here...are you sure it isn't held on my a c-clip or that it is not supposed to come off from that way,perhaps it is removed via the top? try what i suggested in the PM i sent you steve...those were probably you're best bets.i think that running the heaviest weight oil would work the best though...that,or contacting zerodegreec. good luck. ps,i still want to know about the truck you have for sale...