66rc2x Tech

[Lucas]

Any help on this is well, helpful.

I was adjusting the air pressure in both legs. Reducing it to be exact. But when I pressed in very lightly on the right leg schrader valve and the air came out, a little bit of oil came out as well.

Should I be concerned? Or is that somehow normal?

Thanks

[pump]

let me get this straight,
you pressed the release pin on the shrader valve, and oil spray came out w/ air?

if so, thats normal.

[Testy]

Completely normal.

Marzocchi doesnt have a sepperate chamber for the air, so it just mixes and foams with the oil.

[pump]

Completely normal.
so it just mixes and foams with the oil.

Fork oils don't foam, if they did, your fork legs would blow up upon impact.

[Dantes Inferno]

No.

There is a frothy mess inside my air marzocchi forks.

[C.Lee]

i believe fork oils do foam.. if they are cheap oil...
they did foam when i hd slider

[Lucas]

Thanks people - I was getting worried.

[switch]

i believe fork oils do foam.. if they are cheap oil......or if you have moisture in the oil...

[freakonaleash]

Nope, fork oil doesnt foam, lookin at a bottle of it right now, "non-foaming" or else you could just use any other oil. Thats why you dont throw motor oil in your forks