~~~~Sacred Shed Thread II~~~~

[Rida of RM7]

how much, lol, you should really start to pm peps lol

[Cheech]

yaa or msn :rolleyes: :rolleyes:

[RiDiCuLoUs]

when trail day?? time, meet where? what we building ect

[Tom P]

Originally posted by aShogunNamedMarcus
Its that time again. The Shed Bike Club is holding another Shed Trail Day in Watershed Park in Delta. The when and the where is like this:

When: This Sunday, Feb 13th, @ 11am.
Where: Meet at Pinewood Elementary in Delta BC

There will be a BBQ to follow provided by the great staff at Krusty Cycles aka Caps Richmond.

Come out to support the rebuilding of the Shed. If you've never been out to the Shed, there's no better time to familiarize yourself with the tight little network of trails and the people who know and support them.

Any questions regarding this please pm me or email at ashogunnamedmarcus at hotmail dot com

Future trail dates are as follows but could be subject to change:

Sunday March 6th @ 11:00am
Sunday March 20th @ 11:00am
Sunday April 17th @ 11:00am

[King of Fasia]

another great turnout and a successful day at the shed. even tough we didn't spend time building jumps or stunts, these type of days are the ones that will allow the shed to survive for a very long time. props to those who showed, brett and crew, KRUSTY'S for the mad eats and everyone else who picked up a shovel or moved some dirt. THE KING THANKS YOU.

PS i stink like burger meat:D :D :D

[ride24/7]

Yeah good times... too bad we didn't have the time/manpower to get some extra fun stuff built but the drainage work is what the non-riders see and appreciate and makes us look good. Thanks all for the hard work:thepimp: :D :thepimp:


P.S. more fun stuff to be coming soon;)

[Rida of RM7]

yaa, me and a couple of use were a lil bumbed out about diggen hole all day, but someone has got to do the dirty work sometime or another :D
Hopefully next trail day we will get to some more fun stuff! :cool:

P.S.-Gettin my new bike on tuesday :thepimp:

[Rida of RM7]

I forgot to ask this thou, but does ne one have any adaptors for hayes disc brakes layen around?

[ride24/7]

Originally posted by Rida of RM7
yaa, me and a couple of use were a lil bumbed out about diggen hole all day, but someone has got to do the dirty work sometime or another :D
Hopefully next trail day we will get to some more fun stuff! :cool:

P.S.-Gettin my new bike on tuesday :thepimp:


Me too I really wanted to get the rest of the hits done down at the bottom, but Oh well, gotta get thge dirty work done first:rolleyes:

I'll be in there getting more fun stuff up and ridable soon:D

[RITALIN]

sorry al i couldnt come,,, i was working(steakology 101, and then product testing(the whole menu(2 lob tails, king crab, and about 8 steaks, 3 prime ribs and tonns of seafood) his mornign at work(the keg))) sorry i didnt pm u to give the money to chad)

[ReCkLeSs RiDeR]

the barbecue smelt baaaaaaaaaaad!!!!

[RITALIN]

YEAH MY SECOND DRUNKLS OPUST AFTER THE WORK AT NEW KEG...GOT HAMEMERS WITH FIRST COOOEKS
...yeah for ritalin... thanks bis

[bruiser d]

thanks to everyone for comming out and helping on sunday.the weather was great and props to krusty's for the bbq AGAIN. hey aaron, i heard schley sometimes smells like burger meat too.:P thank for ccokin' the grub king


daver:007:

[Ralph Wiggum]

anybody want to ride the shed wednesday night

[Cheech]

ill be there wednesday after school but i got no lights for a night ride..

[RITALIN]

brendan...why did u change ur avy!!!!!!!!!!!!1

[ride24/7]

Originally posted by Ralph Wiggum
anybody want to ride the shed wednesday night


I'm pretty sure I'll be in around 3:15 -3:30 for a ride if that works for anyone.

[Ralph Wiggum]

damn I really want to try my light out. oh well
i'll see if i can make it right after school, but i dont know if i'd be able to make it by 3:30

[ride24/7]

Originally posted by Ralph Wiggum
damn I really want to try my light out. oh well
i'll see if i can make it right after school, but i dont know if i'd be able to make it by 3:30

Cell# 604-728-0020... let me know when you'll get there and I'll meet you if I can.

[aShogunNamedMarcus]

May I direct your attention to the possiblity of Whistler opening... April 1st!

Can I get a hell yes?

May I also direct your attention to this (http://bb.nsmb.com/newforum/showthread.php?s=&threadid=54160) for info.

If this is an April Fools' joke, its twisted and not right to play with our fragile bike needs like dat.

[the flying moose]

you guys actually still ride bikes??? i forget what that feels like. its hard to get motivated to go ride alone all the time. meh i start a enw job at a bike shop soon so hopefully ill find some new riding buds.

[stillgoing]

James: Almost every Wed night - Ledgeview.
Almost every Sunday (except this one) - somewhere.
You'd be welcome.

[the flying moose]

Originally posted by stillgoing
James: Almost every Wed night - Ledgeview.
Almost every Sunday (except this one) - somewhere.
You'd be welcome.

cool. i might try and hit up the Wed night if i can scrape together a light or wait til its lighter later. sundays are no go because its quality time with the woman. i usually ride during the day when everyone else is at work so its hard to find people to ride with.

[Rida of RM7]

i know this is a little late, but i m finally getting my bike and will be goin through the shed around 4 - 4:30 if i m lucky

see ya there......hopefully

[aShogunNamedMarcus]

Originally posted by stillgoing
James: Almost every Wed night - Ledgeview.
Almost every Sunday (except this one) - somewhere.
You'd be welcome.


What time out there?

[Tom P]

where is "ledgeview"? :???:

[Tom]

Originally posted by .f|oW.
where is "ledgeview"? :???:

aka "McKee Peak" in abbotsford - it's slated for development, so get out and ride it while it's still there:(

[Tom P]

Originally posted by ride24/7
I'm pretty sure I'll be in around 3:15 -3:30 for a ride if that works for anyone.

i'll see you there.

[ride24/7]

Originally posted by .f|oW.
i'll see you there.

OK I'll be there.:)

[Ralph Wiggum]

ok i should be there around quarter to 4 or 4. I'll just session the goats jumps for a while or something. If you see a skinny geek on a 250 with glasses give me a shout !

[RITALIN]

YES^^^

[Dolph]

people that were at the trail day on sunday that took pics.. please pm me and let me know.. I need to get some content to work with.

[RITALIN]

THANKS A LOT FOR CALLING ME BRENDAN
:censored: :flame:
YOU DIDNT CALL AND TELL ME I COULDNT COME...
FUKING A$$HOLE
I WAS WAITING ON THE PHONE I HAD ALL MY STUFF READY!!
WELL WHATEVER NEXT TIME U WANT TO GO RIDING I WILL JUST FORGET ABOUT U

[RITALIN]

YEAH DID I MEANTION UR AN IDIOT
some friend

[aShogunNamedMarcus]

does baby want his bottle now thats he done?

[aShogunNamedMarcus]

ps: I'm just kidding :P

[RITALIN]

well i was just mad

[Ralph Wiggum]

jesus christ man. i didnt have time to look for your phone number.
if i didnt leave when i did then i wouldnt have even been able to go. i didnt not call you or ask you to go on purpose

[RITALIN]

OH PS
i still am

its just i would never have done that... i would ahve at least had the courtesy to call and say i couldnt pick them up
even if i had to go that instant i would ave told my ride i need to do it cuz i dotn want to be a sell out and ruin his night off

[Ralph Wiggum]

yeah i know i felt bad on the way there
i already got punished for it by karma so dont worry about it :cool:

[RITALIN]

not punishment enough

[aShogunNamedMarcus]

children simma down damn it :cool:

there's plenty of time to ride. and if you really wanted to ride, you could've went for an urban .

next subject - who's goin to the outdoor show this weekend?

[Cheech]

is there anything to see on friday? or is it just registration for competeters?

[Rida of RM7]

Good work everyone!
Just went for my first rip through the shed in a year and a half and it is much better than when i last ride in it! Only thing that is left now is to make some more jumps, drops and logs (if possible).
I m goin ridin all weekend so hopefull see some of ya out there, just post a post when u are about to go for a rip!

[Tool]

Hey Jon, you playing hooky at work tonight?:nono:

[Rida of RM7]

naa, i was goin to head up north to see my brother because i have not seen him since christmas, but two days before we were about to leave my aunt died and i was to make a choice, go up there and be alone (i do not know that side of the family) or stay here and hit the shed, outdoor shore and maybe the north shore. But i told my boss about this and he said that i better just go, but i decided to stay and go biking!

[Faithless]

I've missed alot of this thread.

Would someone like to recap on the shed?

[the flying moose]

Originally posted by MajinHurricane
I've missed alot of this thread.

Would someone like to recap on the shed?

three words.

the shed rules.

[Rida of RM7]

that pretty much sums it up!

[Faithless]

Ok anyone down for a ride anytime soon?

[Dolph]

Hey people,

I'm still working on the website and she's almost done.. I'm still in serious need of trail day pictures, pictures of riding around the shed, etc.

please email pics to kinskofer@shaw.ca or send me links to pics online, preferably not on pink bike as they stamp their pics with their logo.

thanks.

Eric

[ride24/7]

Originally posted by Dolph
Hey people,

I'm still working on the website and she's almost done.. I'm still in serious need of trail day pictures, pictures of riding around the shed, etc.

please email pics to kinskofer@shaw.ca or send me links to pics online, preferably not on pink bike as they stamp their pics with their logo.

thanks.

Eric

Did you get my pm with the link to the pics thread?

[Dolph]

yes.. I did. Actually I know Dave, so I'll get the pics off him directly so we don't have any pink bike logos attached.

I'll use those on the home page I think.

If any one else has trail day specific pics from the last trail day.. I need them now please.

[aShogunNamedMarcus]

this Dave?

[ride24/7]

Originally posted by aShogunNamedMarcus
this Dave?

No a different Dave... Grimjack on the board here. He took a bunch of pics of me and Bruiser and posted them up in the pics forum. Some tuned out pretty good.

[King of Fasia]

Hey Al and Tom, nice work on the hard line on Stairway, too bad Mike took your material without asking:nono: anyways, the shed is buff and lots of fun right now.

Oh yeah, gold crowns are P I to the MUTHAF**KIN M P

[ride24/7]

Originally posted by King of Fasia
Hey Al and Tom, nice work on the hard line on Stairway, too bad Mike took your material without asking:nono: anyways, the shed is buff and lots of fun right now.

Oh yeah, gold crowns are P I to the MUTHAF**KIN M P



Did you ride it today? how did the burm line up? I'm going in tomorrow for a spin and see how it rides...

[ride24/7]

Originally posted by King of Fasia
Oh yeah, gold crowns are P I to the MUTHAF**KIN M P

Oh, and you are a gear whore:P

[Tool]

Stuff looks great al, msybe i'll get a chance to ride it tommorrow or sometime later this week.

Anybody know what happened to the two buckets up by the goats jumps?????

Plus we need some rain to pack up all the dirt on the new sections:o

[ride24/7]

Brett and co. had both buckets the other day. Mine got put back where it was. they were going to put yours back as well but I'm not sure where. The white one is 9in the stump with my tools.

[King of Fasia]

Hey AL, at least i ride my gear that i so belovedly whore;) :D :D anyways, what's the dilly with ur tools and such and have u checked any of the trail for damage or sabotage?

[ride24/7]

Originally posted by King of Fasia
Hey AL, at least i ride my gear that i so belovedly whore;) :D :D anyways, what's the dilly with ur tools and such and have u checked any of the trail for damage or sabotage?

Yeah i checked everything and no damage that I could see. But that doesn't mean it's going to stay that way.:rolleyes:

Heres an email Brett is sending out to all members in case anyone is wondering whats going on.

On February 23rd between 9:15 and 11:30 am, somebody has found our tool stash spot in the stump on the side of Stairway. Al called me immediatley to notify me that all of his tools as well as his backpack had been stolen.
The only tool left was his axe, which was holding a rather eerie note into the log, it read:


The curse has begun


We don't quite know what to make of it, other than some nut job has been hiding in the bushes watching where Al has been stashing his tools. Al puts more time and energy into rebuilding our beloved trails than anyone, he deserves notes of thanks and new tools purchased for him, not what has happened.

I strongly recomend everyone who is riding in the Shed to thouroghly look over all stunts before riding, as this is could be the same person who was sabotaging trails a couple years ago.

Please don't let this deter you from your usual rides and trail work.

If you see anything suspicious going on in the Shed please take notes and notify myself immediatly. I will be opening a police file with the Delta Police regarding our stolen tools, and the creepy note.

Thnaks, Brett Armstrong

[King of Fasia]

Well that's good, hey if i'm a gear whore, then ur a trail-building whore:P ;) :D

[AnTi-TrAiL_nAzI]

ok.. that is a bit wierd.. wait.. not a bit.. very wierd.. who would be up for an early morning group ride on sunday? like a 9:00 start? since my shore partner has broken him self..

i jsut have a couple questions.. where dose this new "line" straight throu the shed go? i usualy ride simons.. than come out and end up wandering arround.. a few times i have ran into the trail with all the beaut log rides.. i just cant figure out how to this "line" from simons..

[aShogunNamedMarcus]

The email from Brett has been posted in the main shore forum for all to read.

[ride24/7]

Originally posted by King of Fasia
Well that's good, hey if i'm a gear whore, then ur a trail-building whore:P ;) :D

Naaah I'm just whore;)

[Rida of RM7]

Al, were all ur tools in that one stump to the right of where the bridge used to be? Because when i was in there the other week, from the top of lower simons i could see them, But the note sure has got me :???: and i agree that we need to check stuff before we hit it

[Ralph Wiggum]

Originally posted by AnTi-TrAiL_nAzI
ok.. that is a bit wierd.. wait.. not a bit.. very wierd.. who would be up for an early morning group ride on sunday? like a 9:00 start? since my shore partner has broken him self..

i jsut have a couple questions.. where dose this new "line" straight throu the shed go? i usualy ride simons.. than come out and end up wandering arround.. a few times i have ran into the trail with all the beaut log rides.. i just cant figure out how to this "line" from simons..

I might be in for that. If not I'm sure somebody else would be glad to show you the new trail in it's entirety.

[Rida of RM7]

Yaa, i would be up for that, but my boss might have me in working but i will try and make it!
As for the new trail, is it that 6 pack by the new drops al built :???:

[AnTi-TrAiL_nAzI]

i dont mean like a new trail.. i mean like the whole line that was built from top to bottom..

[Rida of RM7]

ohh, :D but who did make that six pack thou?

[Ralph Wiggum]

Originally posted by AnTi-TrAiL_nAzI
i dont mean like a new trail.. i mean like the whole line that was built from top to bottom..

If you're talking to me, that's what I meant :o

[AnTi-TrAiL_nAzI]

no i was talking to rida of rm7

[Rida of RM7]

lol, now i know, but who did make those lil jumps thou?:???: :???: :???:

[Tom P]

Originally posted by Rida of RM7
who did make those lil jumps thou?:???: :???: :???:

Al built em and I was his rock/dirt biatch.

[Rida of RM7]

lol:D

[hard_core_biker]

wow, 472 pages:eek:

[Mike_Shore_rath]

Hey Guys I haven't posted here in ages. Hey Al and Tom sorry i took your material but it was put to good use as you may have noticed. I went in today after work to put in the last teeter but unfortunately i didn't have the proper tools to put it in place plus it got dark real fast. If you guys need help just pm me i'm free after 4. It's great to be back riding again and building in this phenominal weather.

[ride24/7]

No big deal Mike... I did have plans for that piece but I now have a new plan;)

[ride24/7]

NOW FOR THE REALLY BIG QUESTION


now that the http://www.shedbikeclub.com is up and running with a forum just for us shed heads do we let the old sacred shed thread die or does it live on to million post mark?

[ReCkLeSs RiDeR]

it should live on that new site isnt nsmb this is

[AnTi-TrAiL_nAzI]

it lives on! you cant kill this succer!

[Rida of RM7]

true!

[RITALIN]

you mean 100,000th post

[Rida of RM7]

not post, views

[Tool]

yeah this is only the 7085th post:P

[bruiser d]

7086 sucka's


daver:thepimp:

[Rida of RM7]

to bad for u but i got 7087!

[ReCkLeSs RiDeR]

7088 is way cooler

[Tool]

bunch of post whores:P

[Rida of RM7]

dam right, oh wait i m 7090 sucka!

Simon, let me know when u go for ur next ride!
:D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D

[ride24/7]

Me and the Bruiserman will be rippin' da shed tomorrow morning probably around 9:30-10 am if anyone want to skip work/school and join up... or all you unemployed bums <cough> .flow. <cough> :D

[Tom P]

I think I'm going for a pedal up fromme. ;)

[Rida of RM7]

i would skip to come with yaa (i hate art!) but i m taken my bike into the shop to get some minor repairs done, sorry!:rolleyes:

[RITALIN]

rdding tomorrow...maybe woodlot

[aShogunNamedMarcus]

buy my brakes for $100 for the set. or 50 bones each. no adaptors or rotors included.

lever bodies, calipers and hoses. bled. just throw them on your bike.

just two good hayes mags, black and champagme, right and left, front and rear.

[Cheech]

anyone down for a rip tomaro?? around like after 12

[ride24/7]

Nope... going to Eagle Ridge :D

[ReCkLeSs RiDeR]

Originally posted by ride24/7
Nope... going to Eagle Ridge :D


ohoho I will buy you a donut to show me around there one day:heart: I went once before but I forget all about it

[Rida of RM7]

who made the jump on the drop trail?
I went flying off it today and landed in the hole created by the creek and i flew into the :censored: tree!
Got a dead leg and a dirty pair of pants, it could of been worse but i m really sore lol!

[Ralph Wiggum]

haha maybe you should scope stuff out before you hit it :P

[ride24/7]

Originally posted by Rida of RM7
who made the jump on the drop trail?
I went flying off it today and landed in the hole created by the creek and i flew into the :censored: tree!
Got a dead leg and a dirty pair of pants, it could of been worse but i m really sore lol!

I don't know but it shouldn't be there so it will be gone soon.:rolleyes:

[ride24/7]

Originally posted by ReCkLeSs RiDeR
ohoho I will buy you a donut to show me around there one day:heart: I went once before but I forget all about it

OMG 4 lost souls ROCKS ... totally dry... traction at it's finest... too much fun... did 4ls. masssage, manhandler, three little pigs, some other trail with a killer rock drop. and loggers... an epic day :woot: :woot: :woot: :D :D :D :D :D :D


and yes I'll show you around some nice dry day and we'll rip it up chadley

[ReCkLeSs RiDeR]

Originally posted by ride24/7
OMG 4 lost souls ROCKS ... totally dry... traction at it's finest... too much fun... did 4ls. masssage, manhandler, three little pigs, some other trail with a killer rock drop. and loggers... an epic day :woot: :woot: :woot: :D :D :D :D :D :D


and yes I'll show you around some nice dry day and we'll rip it up chadley

yay....:heart: as long as I can put weights on your bike to slow you down on the up-hill part:rolleyes:

[King of Fasia]

sweet day in the woodlot today, schooled platinum and rode carpenter/blood donor too. props to eric who cleaned the gap at the bottom of blood donor and made it look eazzzzzzay, i really like summer in FEB.:D

[ride24/7]

Originally posted by ReCkLeSs RiDeR
yay....:heart: as long as I can put weights on your bike to slow you down on the up-hill part:rolleyes:

won't need em 80% of the climb is a push anyway:rolleyes: I really wish there was a ridable way up eagle but maybe it's better this way ... keeps trafic way down.

[ride24/7]

Originally posted by King of Fasia
sweet day in the woodlot today, schooled platinum and rode carpenter/blood donor too. props to eric who cleaned the gap at the bottom of blood donor and made it look eazzzzzzay, i really like summer in FEB.:D
sounda like a good time:D
I bet conditions were :thepimp: :thepimp: :thepimp: out there. Gotta love this weather:cool:

[ReCkLeSs RiDeR]

Originally posted by ride24/7
won't need em 80% of the climb is a push anyway:rolleyes: I really wish there was a ridable way up eagle but maybe it's better this way ... keeps trafic way down.

yah I somewhat remember darcy from the bikezone pushing up...then taking smoke breaks:lol:

[Dolph]

yeah bra.. sux that you got rocked by those punks camping on the transition.. not too smart.

Thanks for the encouragement.. I wanan go back up and hit up those tripples some time..

platinum was good.. love that trail.

[aShogunNamedMarcus]

You should've seen the turnout on Fromme yesterday. It was immense. And now I have the urge to ride again..

[ride24/7]

I was inna shed this morning continuing the work on stairway... got the tranny for the hard line in... might have to make it a little higher/steeper... we'll see after the kicker/drop is in.

Mike the Teeters look good but we may run into problems with the tallest one, it seems to be twisting or bending a little bit off line. I think it probably happens when someone bails off it. It may need to be re-enforced down the line.

[ride24/7]

I won't be making it to the next trail day so I thought i would throw out a couple suggetions/ideas to you. We should make an effort to beautify the trail. If you step back and look at it as a non rider it is really visually unappealing. Three things I think we should focus on:

1 narrowing down the trail, it's 10 or more feet wide for most of it's leangth.We could use logs and branches or even rough in some low ( 12" high ) barriers to try to keep people to a narrower track. The little barriers would be easy, just puond in a couple posts and nail a thin log or branch to the top.

2 We should transplant some ferns, plants, shrubs etc from in the bush to the really beat areas along the trail. Especially along the connector where we have those wide mud areas on the sides and in any other areas along the trail where we have narrowed it down and have beat up areas.

3 try to educate riders ( difficult I know ) to keep to the trail when sessioning stuff and going back and forth and turning around., and to tell people that when they fall off a stunt to stay as close to the log or whatever as possible so we don't end up with a 20' wide dead zone around all our log rides.

I think this would go along way to improving our image with other park users.

Discuss

[Rhubes]

GEtting a bone marrow transplant march 22, going back in the hospital march 18, then I have to be there for 4-6 weeks (i'm shooting for 4!).

Then I have 100 days of going to the hospital twice or so times a week and VGH monitoring me closely, but I'll be getting stronger and stronger and hopefully be back on my bike riding fairly seriously again by may or june :)

I didn't die :D

[ReCkLeSs RiDeR]

YAY :clap: way to be big shooter :heart: I'll come visit you and bring you a pizza when you are back in the hospital

[ride24/7]

Way to kick some ass Paul:D :thepimp: :D You just keep on keepin on and we'll be rippin' the shed again in no time.

[Mr Ripper]

Next weekend, we shuttle seymour buddy :D

Originally posted by aShogunNamedMarcus
You should've seen the turnout on Fromme yesterday. It was immense. And now I have the urge to ride again..

[Mike_Shore_rath]

Damn, yesterdays trail day on Fromme was without a dumbout a hell of a turn out and it was an awesome trail day too Mmm burgers and free bike shirt. 150+ people were there. Is the metal bending or the wood itself on the tallest teeter on Stairway? Also when are we gonna re-build the drop on Goats? Well it would have to be a rolldown i'm guessing but if anyone knows plz post. I acctually wouldn't mind building it myself if I get the okay. Also what are the rules for ladder bridges height to width ratios. I wanna building a massive rolldown with the choice of a drop to a huge table.

[Mike_Shore_rath]

Originally posted by Rhubes
GEtting a bone marrow transplant march 22, going back in the hospital march 18, then I have to be there for 4-6 weeks (i'm shooting for 4!).

Then I have 100 days of going to the hospital twice or so times a week and VGH monitoring me closely, but I'll be getting stronger and stronger and hopefully be back on my bike riding fairly seriously again by may or june :)

I didn't die :D

When you get out you must get stronger than Eric, he's already benching 75's total of 150 with free weights. Great to hear from ya, the shed is defenately coming back to it's original glory.

[ride24/7]

Originally posted by Mike_Shore_rath
Damn, yesterdays trail day on Fromme was without a dumbout a hell of a turn out and it was an awesome trail day too Mmm burgers and free bike shirt. 150+ people were there. Is the metal bending or the wood itself on the tallest teeter on Stairway? Also when are we gonna re-build the drop on Goats? Well it would have to be a rolldown i'm guessing but if anyone knows plz post. I acctually wouldn't mind building it myself if I get the okay. Also what are the rules for ladder bridges height to width ratios. I wanna building a massive rolldown with the choice of a drop to a huge table.


The metal is bending I think

I'm pretty sure the drop on goats will be on the agenda on the next trail day or maybe the last one in april.

Ask Brett he'll be able to tell you about hight width etc and also about the goat drop. you can email him at the shedbikeclub@hotmail.com addy or post or pm the shedbikeclub.com forum... his handle is redtape.

[Rida of RM7]

i love the step up idea on stairway. But i think we sould have on like the one at whistler.
Another thing is the rock jump at the end of goats, all those lil jumps leadin up to it should be taken out, i have gone as fast as i can, hucked as hard as i can and i still can't make them, i think we sould just flaten them out to what they were before.:eek:

[aShogunNamedMarcus]

Originally posted by Rida of RM7
goats, all those lil jumps leadin up to it should be taken out, i have gone as fast as i can, hucked as hard as i can and i still can't make them, i think we sould just flaten them out to what they were before.:eek:

If you mean after where the goats drop was and before the connector trail, you can pump one and then air the next. But I could be waaay wrong.

[aShogunNamedMarcus]

Originally posted by Mr Ripper
Next weekend, we shuttle seymour buddy :D

Gotta say no dude. Have the second part of a stag coming up. So that means I'm also missing the pub night. Else I'd be in like flyn.. or some shit like that.

[aShogunNamedMarcus]

look like grow op jerseys :smokey:

I freakin love 'em :D

[rampage 01]

Originally posted by Mike_Shore_rath
When you get out you must get stronger than Eric, he's already benching 75's total of 150 with free weights. Great to hear from ya, the shed is defenately coming back to it's original glory.

im a beast....

i haven't been in for like... almost 2 years, i wanna get back into it with craig..

the next big sunny break we get, i'll see you guys in there hopefully, it will be nice to ride again.

although, i don't have a helmet anymore (n) ill find one.

just look for the beast on the black rampage with dual 24s

[Rida of RM7]

Love that avitar rampage!
:thepimp: :thepimp: :thepimp: :thepimp: :thepimp::thepimp:

[Ralph Wiggum]

hey chad i heard your new frame and fork arrived
how they look

anybody going to be in the shed tomorrow night and wouldn't mind me coming along?

[Rida of RM7]

gotta work tomorrow :(

[ReCkLeSs RiDeR]

Originally posted by Ralph Wiggum
hey chad i heard your new frame and fork arrived
how they look

anybody going to be in the shed tomorrow night and wouldn't mind me coming along?

:drool: yes...I am stoked:)

[ride24/7]

Originally posted by ReCkLeSs RiDeR
:drool: yes...I am stoked:)

Whatcha gettin Chad?

[Dolph]

hey folks.. just wanted to let y'all know that that forum is back up and running.

Sorry for those that had to wait for posting.. please post away and get that forum humming.

[ride24/7]

The first section of the hard line on stairway is done... it looks doable but :eek: so someone get in there and hit it and tell me how it rides:D

[Tom P]

The new step up to log to kicker gap is looking tight :thepimp:

After Al took off I filled in some mud holes and put some gold here and there. Also added some ferns along the connector so its not looking as beat. :P

[Tool]

i'm gonna be in there tommorrow for a ride so i'll check it out:D

On another note, would the person(s) adding that crushed rock to the lips of the goats jumps please stop. It doesn't compact and it doesn't shape at all, it more or less just pollutes the gold and makes it really hard to form. There is an area off to the side where i have been getting gold from and it's kind of covered up. Use that stuff if you need dirt, just try and remove any of the rocks and remember to cover the pit up

[Tom P]

Originally posted by Tool
would the person(s) adding that crushed rock to the lips of the goats jumps please stop.

crushed gravel belongs on the walking trails

[Mike_Shore_rath]

Originally posted by ride24/7
The first section of the hard line on stairway is done... it looks doable but :eek: so someone get in there and hit it and tell me how it rides:D

Sweet :thepimp:

[Rida of RM7]

i wana see it !
:D :D :D :D :D

[King of Fasia]

hit the hard line today, super flowy and awesome fun, props to Al and Tom for building a sweet stunt.

[Tom P]

ill post up some pics once i get them hosted.

Edit, pics added


Heres the new roll-in off the teeter totter log into the new step up line.
http://i2.photobucket.com/albums/y4/ShedRider/Shed_rollover.jpg

the step up from head on

http://i2.photobucket.com/albums/y4/ShedRider/Shed_stepup.jpg

the new step up line from the side

http://i2.photobucket.com/albums/y4/ShedRider/SHED_STEPUP2.jpg

[ride24/7]

Originally posted by King of Fasia
hit the hard line today, super flowy and awesome fun, props to Al and Tom for building a sweet stunt.

Good I'm glad it all works... you just never know until someone hits it up. ;) So the step up puts you up on the log no problem? That was the thing I was most worried about.It's hard to judge sometimes how much speed and kick will be needed. I won't be getting a chance to hit it now for a while so everyone will be stylin' it by the time I start trying to flail my way up onto it.:rolleyes:

[Tom P]

The King hit it so smoooooth like He's been riding it for years :thepimp:

[Ralph Wiggum]

sweet something new to eat shit off of :thepimp:

[axx]

that looks fun, maybe ill return to the shed after not going for a year or more. Ill also probally be at that race thinger. But hmm that looks awsome.

[Rhubes]

Great work AL!!!

Looks like fun!

Why not make the roll-in, more of a roll DOWN though (steeper?)....?

[Rhubes]

I know we're trying to maintain NARROW trails now, (no more twenty feet wide plant-less areas), but it's kind of a shame on stairway, because the area where the step up is really has enough width to put in two stunts right next to each other! That'd be so cool!

Shame we can't/shouldn't.

[ride24/7]

Originally posted by Rhubes
I know we're trying to maintain NARROW trails now, (no more twenty feet wide plant-less areas), but it's kind of a shame on stairway, because the area where the step up is really has enough width to put in two stunts right next to each other! That'd be so cool!

Shame we can't/shouldn't.

There isn't really room for another stunt there now... but there will be something going in where the gap after the stairway drop was but before lower simons ... no plans as of yet just a couple ideas.

Hopefully there will be more alternate lines to be put in in other areas though.:D

[Rhubes]

good. glad to hear it.

[Rida of RM7]

Originally posted by Ralph Wiggum
sweet something new to eat shit off of :thepimp:

I luv ur style of thinking!

Sounds alot like mine :D

[aShogunNamedMarcus]

Originally posted by .f|oW.
The King hit it so smoooooth like He's been riding it for years :thepimp:

Well he is the King...

[the flying moose]

anymore visits from our tool thief???

[ride24/7]

Originally posted by the flying moose
anymore visits from our tool thief???

nope not that we've noticed anyway.:D

[Rhubes]

What's this I hear about getting 50% of the profits from the shed race?

NO WAY. I don't take nor need charity. I'm not poor! Trust me my parents have spoiled me like crazy in the last few months!

I will respectfully decline, but I thank you for the gesture.

I'd much rather see the money go to trail building some new cool stuff!

[Tom]

is the trail day still on Sunday? I haven't seen anything on here about it lately.

[Mike_Shore_rath]

Originally posted by ride24/7
There isn't really room for another stunt there now... but there will be something going in where the gap after the stairway drop was but before lower simons ... no plans as of yet just a couple ideas.

Hopefully there will be more alternate lines to be put in in other areas though.:D

I've already started to get lumber for a lobotomizer style roll down that will be going where that huge fallen tree is. After the roll down I want to build a massive table rather than a gap jump where it used to be. It would be rotated 180 degrees facing lower simons.

[King of Fasia]

all good suggestions, but really do we need huge stunts on the trail, i mean this is the shed and all. for me flow and technical stunts are much more important than a huge pile of dirt sitting in the middle of the trail, i mean i'd like to hit huge jumps too, but lets leave those stunts to other places. what's most important is keeping the trail looking relatively natural and keep the damage we do to the surrounding areas to a minimum.

we should focus energy on what al said "beautifying the trail" not putting more stunts on it. the trail is getting pretty saturated with stunts and the area around staiway only needs a few little additions. So Al and Mike, since u guys are working on that area, maybe u should get together and discuss ideas which are pleasing to eye and benefit the trail as a whole for every rider. Keep in mind that i'm not dissing ideas but just making suggestions for future plans to our trail.

[Rhubes]

We should think about trying to get hooked up with some dirt, to build some dirt jumps in the little meadow off where the chute is (that steep little trail)...

[Mike_Shore_rath]

The table that would be built would be from wood as opposed to a huge pile of dirt. It would be the same as the gap jump that I had built. But i'm down for narrowing the trails. I'll be at the trail day Sunday see you there. :D

[Rida of RM7]

i think we sould not do ne thing to piss of the city right now, lets try to get on their good side then approch them with the suggestion that we need a new "begginer trail" and that our trail are a little to hard for begginer bikers. If we get this, we can open up a new trail that could have a lot of easy stuff but also at the same time, harder thing off to the side of them. It is all about straigic plan to get the shed into a great area to bike in for everyone!

If anyone wants to plan out a begginer trail, i already have a great little map all set out! and stuff can be built off to make it nice and fun for us, the more advanced riders :thepimp:

[Tool]

i think that we are still a ways away from another trail, we still have more left on this first line.

And yeah, lets save the big jumps for later down the road down at the bottom. I like the idea too about keeping things low key.

Hey Flow, i forgot to mention last time i saw you but those ferns look great, it really makes the connector look good:D

And Al, that new line great, you should have seen the king hit it, but then again he is the king:o

[Rida of RM7]

yaa, but some day we will have the shed all ripped up a nice ;)

[ReCkLeSs RiDeR]

ah I just got home form work and checked my e-mail and found out that there is a trail day tomorrow....where have I been?

[King of Fasia]

CAN U SAY HIP IT!!! gonna try the new line tomorrow see if it flows as well as the rest of the trail.

[Rida of RM7]

hit it like i did...straight into the bush's!:D :P :thepimp:

[Tool]

great trail day today everyone. I feel bad sometimes to all the newbs that come out cause i probably seem like a demanding asshole that just orders then around to be my rock bitches:P

Can't wait to try it all out this week:thepimp:

[aShogunNamedMarcus]

Originally posted by King of Fasia
CAN U SAY HIP IT!!! gonna try the new line tomorrow see if it flows as well as the rest of the trail.

hip it...

hip it good..


**dances to a shed cover of whip it **

[mace2]

that stepup skinny gap line looks awesome :eek:

...i'm still working at getingt past the double teeters though :P

[Rida of RM7]

Originally posted by Tool
great trail day today everyone. I feel bad sometimes to all the newbs that come out cause i probably seem like a demanding asshole that just orders then around to be my rock bitches:P

Can't wait to try it all out this week:thepimp:

I would rather be a rock bitch then a gear whore :P *cough* dave *cough*

[the flying moose]

any pics from the trail day?? i was stuck at work til 5 so i couldnt come out.

[Rida of RM7]

i did not see ne one with a cam, but i was thinkin we should phone a new station next trail day and ask them if they would be interested on how we were able to reach an agreement with delta and to show how something could be worked out on the northshore. They have been doin there part, it is the least we could do to help them out up there.

Besides, we would be able to exploit our sponcers and maybe get more people on our side over the whole issue on the north shore!

[Mike_Shore_rath]

Awesome Trail day today guys, tons of fun was had. Next trail day, March 20 should be even better. :cool: :thepimp:

[Cheech]

the forcast calls for rain on tuesday you guys still want to ride if it rains or move it to thursday? i work wed.

[Mike_Shore_rath]

Originally posted by Cheech
the forcast calls for rain on tuesday you guys still want to ride if it rains or move it to thursday? i work wed.

Yes, if you want we could do a little bit of maintenace on tuesday. I want to replace the very first on ramp with split cedars and a few other small things. I can always give you guys a ride home after.

[Rida of RM7]

I work thur so that is not good, but aj, come on, i know the guys think u r made of sugar but i told u not to listen to them, they have more than just shit up their ass!

Don't be a bitch, come ride in the Ditch!
:D :D :D :D :D :D :D :D :D :D :D :D :D :D

[aShogunNamedMarcus]

Originally posted by Mike_Shore_rath
I've already started to get lumber for a lobotomizer style roll down that will be going where that huge fallen tree is. After the roll down I want to build a massive table rather than a gap jump where it used to be. It would be rotated 180 degrees facing lower simons.

Have you talked to Brett about that at all Mike?

As much fun as that sounds that I doubt the City would go for it and again, its not exactly going to make the area pretty, which is important, and at this point in time, isnt part of any trail plans as far as I know. Hate to say it Mike but I will take it out if you start building without going through the hoops first.

[aShogunNamedMarcus]

Originally posted by Rida of RM7
i think we sould not do ne thing to piss of the city right now, lets try to get on their good side then approch them with the suggestion that we need a new "begginer trail" and that our trail are a little to hard for begginer bikers.

I think we currently are on the City's good side.

And besides, the Shed Trail (aka the line of trails we've been woking) is the beginner line :P

[aShogunNamedMarcus]

Originally posted by Rhubes
I know we're trying to maintain NARROW trails now, (no more twenty feet wide plant-less areas), but it's kind of a shame on stairway, because the area where the step up is really has enough width to put in two stunts right next to each other! That'd be so cool!

Shame we can't/shouldn't.

Isnt there already? If you count the log ride to the right and the step up, there's 2 :D

[aShogunNamedMarcus]

Originally posted by Rida of RM7
I would rather be a rock bitch then a gear whore :P *cough* dave *cough*

Ohhh dont get me started jr. ... *cough* hack *cough* ....

[rampage 01]

Mike, check your pm's

[bruiser d]

great trail day everyone.................thanks to all who came out and worked hard. props to krusty's {mike } for the bbq AGAIN. c-y'all on the trails this weekend laddy's.The fundraiser at the downer was a sucsess.


daver:007:

[Troup]

Originally posted by Tool
I feel bad sometimes to all the newbs that come out cause i probably seem like a demanding asshole that just orders then around to be my rock bitches:P
I hate that shit, Derek Dix used to always make me collect rocks, god damn that rich SOB!:lol:

[Cheech]

wtf are you talking about john.....
we will just go tues hopefully it wont be pissing i will still be in if its just a light rain..

[Mike_Shore_rath]

Originally posted by aShogunNamedMarcus
Have you talked to Brett about that at all Mike?

As much fun as that sounds that I doubt the City would go for it and again, its not exactly going to make the area pretty, which is important, and at this point in time, isnt part of any trail plans as far as I know. Hate to say it Mike but I will take it out if you start building without going through the hoops first.

Don't worry i won't start yet. Brett said he'll pass my idea by the city council. I'll put railings on it if that's what they want, If I get the okay from Brett I promiss i'll be nuts. I might start something so you can have a real hard time taking it out. j/k
:cool:

[Mike_Shore_rath]

^^ edit: it'll be nuts.

[Mike_Shore_rath]

I went to the shed today at about 5 pm and I replaced the first on ramp with split cedar rungs that Al made. I finished at 7pm and i pretty much put it together in the dark since my BLT light was dieing. All in all I hope it looks real nice even though I put it together in the pitch black. See ya there AJ and Jon tommorow for the ride at 4:30 if anyone else wants to join us feel free. :thepimp:

[Tom P]

Originally posted by Mike_Shore_rath
I replaced the first on ramp with split cedar rungs that Al made.

[self-promotion]I split those rungs[/self-promotion] :P

[King of Fasia]

hit the hip today, once again SMOOTH, oh yeah the highest tires marks on the tranny are mine:P :P :P , good work everyone, we should call the shed trail, SUPER FLOW

[aShogunNamedMarcus]

Originally posted by Mike_Shore_rath
Don't worry i won't start yet. Brett said he'll pass my idea by the city council. I'll put railings on it if that's what they want, If I get the okay from Brett I promiss i'll be nuts. I might start something so you can have a real hard time taking it out. j/k
:cool:

haha no worries Mike.. I was just sayin that to set an example.. or something..

Im all for the idea.. except I like the idea of riding up the log to the roll down better .. that'd be pimptasitcally huge :thepimp:

[aShogunNamedMarcus]

Originally posted by King of Fasia
hit the hip today, once again SMOOTH, oh yeah the highest tires marks on the tranny are mine:P :P :P , good work everyone, we should call the shed trail, SUPER FLOW

so its shed goodness ? hows the whole line down feel?

[King of Fasia]

smooth and buttery, the shed head shredder will be a blast

[bruiser d]

you are my hero king:P :love: :lol:

[ReCkLeSs RiDeR]

is there a new hip or something fancy?

[aShogunNamedMarcus]

Originally posted by ReCkLeSs RiDeR
is there a new hip or something fancy?

Ya man... if you checked your email once n while you might know where it is :P

edit - but yea there is. just south by south west at a pitch of 19 degree's of after lower simons.

[King of Fasia]

hey dave can we call u the fuzz yet?:D

[Cheech]

ya i it is pissin out did you go mike? or jon??

[aShogunNamedMarcus]

Originally posted by King of Fasia
hey dave can we call u the fuzz yet?:D

who me? nah man.. i just shaved :P

[Rida of RM7]

Originally posted by Cheech
ya i it is pissin out did you go mike? or jon??

Shit man, i told u, u r not made from fu*king sugar!
It was B E A utiful! had a jolly good time!

We got to go somewhere on the weekend thou or maybe on thursday after work if it is not raining!

[Mike_Shore_rath]

Originally posted by aShogunNamedMarcus
haha no worries Mike.. I was just sayin that to set an example.. or something..

Im all for the idea.. except I like the idea of riding up the log to the roll down better .. that'd be pimptasitcally huge :thepimp:

Hmm, good point, that would take less work to do also. Well hopefully Brett will get the okay. Does anyone think there should be a small up ramp on stairway so you can skip the two big teeters for beginner riders?

[King of Fasia]

Hey Mike, that would be a good idea if you were so inclined to build it, cuz i've heard from a few people that they would like to see an alternate line to get on to stairway cuz for them the teeters are a little difficult.

And Dave, i meant bruiser D sorry.

[Rida of RM7]

Originally posted by King of Fasia
they would like to see an alternate line to get on to stairway cuz for them the teeters are a little difficult.

I will help u with that mike :D

Maybe next tuesday we could do that :P

[aShogunNamedMarcus]

Originally posted by King of Fasia
And Dave, i meant bruiser D sorry.

Yah I figured that after re-reading it and the poe leece comment.

[Dolph]

please post pics of the hip jump on the site, if anyone has any.

[bruiser d]

Originally posted by King of Fasia
hey dave can we call u the fuzz yet?:D


still waiting and waiting king...............................:rolleyes: :???: :stupid:



daver:007:

[Tom P]

the new hip a la simon

http://i2.photobucket.com/albums/y4/ShedRider/shed_hip1.jpg

[AnTi-TrAiL_nAzI]

aww :( its the wrong side for my chubby skillz :(

[brignall]

hey.. im new to this site and just wanna say the shed is looking pretty sweet.. good job to all the guys who helped to fix it up

[King of Fasia]

Hey Al, or anyone who likes to climb, i'll do the donwhill section of the first NS ripper if you want, PM me if ur interested.

[RITALIN]

shed blows






















when u dont ride it

[Tool]

Originally posted by AnTi-TrAiL_nAzI
aww :( its the wrong side for my chubby skillz :(

I know, but what can you do, the one below it will be on our good side:D

Oh and i can't wait to hit it again, that new step-up on stairway and the hip both kick ass

[aShogunNamedMarcus]

Originally posted by King of Fasia
Hey Al, or anyone who likes to climb, i'll do the donwhill section of the first NS ripper if you want, PM me if ur interested.

I was going to post the same thing.. just closer to the start date.

Hopefully we get the Shed jersey's by then.

[aShogunNamedMarcus]

Originally posted by Tool
I know, but what can you do, the one below it will be on our good side:D

Oh and i can't wait to hit it again, that new step-up on stairway and the hip both kick ass

So you both are right foot forward too?

[aShogunNamedMarcus]

So just to add my list of seized or stripped parts - last night I go to take the rotor off my wheel I'm selling and the very last torx bolt head strips out.

So now, I have a headset stuck in reducer cups, a stripped and seized crown bolt in my 888 and now a stripped rotor bolt.

I cant wait to see what happens when I go to build the dh... :rolleyes:

[Tool]

get some allen key head bolts for your rotors, waaaaay better if all you have on you are allen keys:o

[the flying moose]

Originally posted by aShogunNamedMarcus
So just to add my list of seized or stripped parts - last night I go to take the rotor off my wheel I'm selling and the very last torx bolt head strips out.

So now, I have a headset stuck in reducer cups, a stripped and seized crown bolt in my 888 and now a stripped rotor bolt.

I cant wait to see what happens when I go to build the dh... :rolleyes:

put the bolt thats opposite the seized bolt and do it up snuggly. then on the seized bolt take the torx wrench and use a rubber mallet and hammer that sucker in there. it should be easier to undo. i had to remove a stripped bolt like that the other day and it worked like a charm. and like tool says get some allen bolts in there. much easier.

[Tool]

buy an easy out, they can come in handy

[aShogunNamedMarcus]

I'm looking into that Simon.

Also, Xtreme-newb pm'd regarding some newly built DJ's behind the firehall in the Shed. I've emailed Brett about them already.

[Tool]

i know brett is aware of the small one i didn't know there were more.

I'll be in there for a ride today, i'll be at the school at 2:15 till 5ish if anybody is in there

Maybe i'll have to take a look at these new DJ's and check them out for myself;)

[King of Fasia]

meh they are ok, but the kids who are building them are digging serious craters, we mentioned to them to not do that but in the future, if and when anyone sees any unauthorized building make the shed bike club aware and we will deal with it accordingly.

[aShogunNamedMarcus]

Is it the same kids who built ACA?

[RITALIN]

i think so
but if they are nice we can always fill the vraters with rocks and fill

[aShogunNamedMarcus]

Originally posted by RITALIN
i think so
but if they are nice we can always fill the vraters with rocks and fill

Dont know if thats an option since Delta has given us the limits and boundaries of the Shed trail to work within for now. Essentially, anything outside of that is unauthorized from the get go.

[AnTi-TrAiL_nAzI]

Originally posted by aShogunNamedMarcus
So you both are right foot forward too?
yes i am :)

[King of Fasia]

interesting day in the shed, let's see where do i begin, well i wuz havin trouble stylin the hip (i guess fat guys have trouble moving in the air) so i was a little frustrated.

Riding with simon, he hit the hip and blew the berm resulting in a HUGE dent on his top tube, i think that frame is done.

the builder of the frankendrop underestimated the kick of the new jump/hump in the gun range and fully smoked the two metal protrusions that stick out of the ground, made a resounding noise which we heard from lower simons, he was ok tho just a little sore

it's amazing what u can see and hear when you spend a little time in the place we all know and love, THE DELTA WATERSHED.
just a little story:P

[RITALIN]

Originally posted by King of Fasia

the builder of the frankendrop underestimated the kick of the new jump/hump in the gun range and fully smoked the two metal protrusions that stick out of the ground, made a resounding noise which we heard from lower simons, he was ok tho just a little sore


explain this gun range? i know where the drop is but never seen the metal thigns or guns

[Tom P]

Originally posted by RITALIN
explain this gun range?

Its the open grassy area at the bottom of the trail once known as BM. You rode through it before reaching the lower access road. It used to be a gun range back in the day (30+ years ago?) and now it just looks like an open grassy picnic'ish area with a ring of logs and an old firepit near the road.

....and there are two steel sign posts cemented in the ground near the tree line where the trail enters the opening. They make a loud noise when struck by a mt biker.

[Rida of RM7]

lol, sounds like me! :D

[Dolph]

http://www.shedbikeclub.com/forum/viewtopic.php?p=125#125

[bruiser d]

i agree eric.....................i hope frank is ok. when did he do this????

[Tom P]

Originally posted by bruiser d
when did he do this????

yesterday around 430pm

[ReCkLeSs RiDeR]

ouch hopefully he is fine:)

[Mike_Shore_rath]

Think a hacksaw could cut them out?

[aShogunNamedMarcus]

Originally posted by Mike_Shore_rath
Think a hacksaw could cut them out?

Think we should ask before we do?

[Rida of RM7]

maybe that would be a good idea!
we do not want to be ripping out something that they need or still use

[Tool]

we should build a lip off of it:thepimp:

[Tom P]

Originally posted by aShogunNamedMarcus
Think we should ask before we do?

I personally dont think anyone would blink an eye if they were gone.

I rode in there today with a hacksaw intent on cutting them out, but they are each 1/4" thick angle iron and it would be about 6" of cutting to get through one of them.

[Mike_Shore_rath]

That's it i'm bringing the hacksaw and i'll make a lip out of it too :D

[Mr Ripper]

anyone got a cordless sawzall

[King of Fasia]

best way to get rid of them would be a gas powered cutter, like the ones they use to cut rebar, any form workers around?

anyways, ripped the shore today w/a couple of buddies and had a really good day. nailed air supply, the sideshow drop and rode the first half of jerry rig

tomorrow, SQUAMISH!!!!:D :D

[AnTi-TrAiL_nAzI]

i mite be in the shed for a rip tomorrow.. any of you shed heads guna be in there?

[Ralph Wiggum]

i may be there. what time are you going?
i am still uncertain. have other stuff i have to do :rolleyes:

[AnTi-TrAiL_nAzI]

i would probly be there arround 245-3..

[Mike_Shore_rath]

Originally posted by Mike_Shore_rath
That's it i'm bringing the hacksaw and i'll make a lip out of it too :D

I have already cut out the left metal piece with a hacksaw, that's right a hacksaw, only took me 40 min to cut it out :D I also put in a small ramp on Stairway so beginners can skip the teeters. Nearly 50+ people came by walking the trails/riding. I also told a few about the next trail day so we should have a great turnout. :cool:

[Rida of RM7]

i might be there anti, but if i m not there on time then i m not coming.

[Tom P]

Originally posted by Mike_Shore_rath
only took me 40 min to cut it out :D

yah that was some solid angle iron.

[King of Fasia]

that metal owned you Mike!:P

squampton is for mousebrains and it makes riding totally haywire, checked out the step up that u can see in Disorder 5, u know the one in the clearcut, if u watch the movie it's a sick move, but in real life HOLY SHIT!!!!!, maybe next time i'm there and i'm feeling horny i'll hit it.:rolleyes:

[Mike_Shore_rath]

Originally posted by King of Fasia
that metal owned you Mike!:P



The piece of metal is in my garage :thepimp:

[bruiser d]

good job on the angle iron mike.....................i think you owned it dude..........:thepimp: . the shed trail condition is awesome right now.c'ya on the trails dudes........


daver

[the flying moose]

ill be in the shed tomorrow about noonish if anyone else is gonna be there post on up.

[Rida of RM7]

i will be there, but maybe around 3:30 ish!
riding a 04 hucker and will be wearing red shorts!

[Rida of RM7]

i had a good day in the shed! Finally hit the hip without failure! It al's drop and that jump at the bottem of it!
A great day but i wish there were some bigger stunts!

[Tool]

Woo Hooo, SPRING BREAK!!!

I'm heading up to cypress tommorrow ;) Buddy is lending me his other bike:D

[bruiser d]

Originally posted by Rida of RM7
i had a good day in the shed! Finally hit the hip without failure! It al's drop and that jump at the bottem of it!
A great day but i wish there were some bigger stunts!


:???: :rolleyes: